The bed of more traditional pickups like the F-150 can be swapped out in a couple of hours by one or two dudes with a lift and an impact wrench. Heck, you can buy blank F-250s without a bed at all.
> The proposed Active-AWD Trade Platform utilizes a Through-the-Road (TTR) Hybrid architecture to decouple the mechanical drivetrain while maintaining synchronized propulsion via a Vehicle Control Unit (VCU). By integrating high-topology Axial Flux or Radial-Axial (RAX) in-wheel motors, the system achieves exceptional torque density within the limited packaging of a trailer wheel well. The control strategy relies on Zero-Force Emulation, utilizing a bi-directional load cell at the hitch to modulate torque output via a PID loop, ensuring the module remains neutrally buoyant to the tow vehicle during steady-state cruising. In low-traction environments, the system transitions to Virtual AWD, employing Torque Vectoring to mitigate sway and Regenerative Braking to prevent jackknifing, effectively acting as an intelligent e-Axle retrofit. This configuration leverages 400V/800V DC architecture for rapid energy discharge and V2L (Vehicle-to-Load) site power, solving the unsprung weight damping challenges through advanced suspension geometry while eliminating the parasitic drag of traditional passive towing.
A modular truck bed could have
Through-the-road TTR AWD (given a better VCU) and e.g. hub motors or an axle motor.
